Babbman - Cathrine's Wheel II & III

The result of our kite making adventures
User avatar
Babbman
Posts: 2508
Joined: Sun, Oct 29 2006, 12:44 PM
Location: Aurora, IL
Contact:

Babbman - Cathrine's Wheel II & III

Postby Babbman » Mon, Jan 15 2007, 11:47 PM

Well, I wouldn't want anyone to think I was slacking off here...

I started working on 2 more Catherine's Wheels on Saturday... this time I doing a 36 and 48 cell wheel.... the 36 will spin right and the 48 left... the previous 24 cell I made spins left. I'm going to stick these inside of each other... I've been e-mailing with Gary Engvall on how he does his...

Man, what a lot of cutting and sewing on this...

[albumimg]405[/albumimg]
here's all the pieces cut and ready to assemble. Took me all day Saturday to do all the cutting. And of course, I ran out of my good white ripstop and had to use some crappy white... This was all cold cut...

[albumimg]417[/albumimg][albumimg]418[/albumimg]
Tabs, tabs and more tabs... tedious and repetitious but not difficult

[albumimg]419[/albumimg]
Inner and outer rings sewn up and ready to join. All of the risers are joined to the inner rings... these are MUCH bigger than the 24 cell

[albumimg]420[/albumimg][albumimg]421[/albumimg]
Just some closeups of the sewing

[albumimg]422[/albumimg]
Everything set for tomorrow's sewing marathon...

I cut a lot of corners this time... I didn't draw many guidelines for sewing the risers like I did on the 24 cell... I just used my presser foot to keep everything straight. I also didn't use any seam tape on any of the seams or risers.... just a small piece on the tabs to keep them in place while sewing...

So far, I spent all day Saturday cutting and making up the tabs, Sunday sewing the tabs on and a few risers and most of tonight sewing all the risers in place. Went through almost 150 yards of white nylon thread and 3 bobbins...

Tomorrow I'll do the outer ring and probably cut the bridles....

Wed, I have to learn how to splice the bridle and then learn how to do a quoit... which is basically a knotless loop... Gary suggests not having any knots for the bridles to catch on each other as the rings inflate and deflate with the wind...

So much to learn... and so little time...

I sure hope they look cool.... especially after all this work!

Chris (aka Babbman)

They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety...
Benjamin Franklin, Historical Review of Pennsylvania, 1759

User avatar
Chris
Posts: 877
Joined: Sun, Oct 29 2006, 06:58 PM
Location: Montgomery, Illinois

Re: Babbman - Cathrine's Wheel II & III

Postby Chris » Tue, Jan 16 2007, 05:33 AM

:shock: That CW is going to look cool :up: :up:
It's a great satisfaction knowing that for a brief point in time you made a difference.

-unknown

User avatar
Babbman
Posts: 2508
Joined: Sun, Oct 29 2006, 12:44 PM
Location: Aurora, IL
Contact:

Re: Babbman - Cathrine's Wheel II & III

Postby Babbman » Thu, Jan 18 2007, 06:13 AM

FYI, I'm still working on the wheels... I finished up all the sewing last night at 11pm and started bridling them tonight... BUT THEN, I ran out of bridle... oh well... will be talking to Dave tomorrow to get some more..


Chris (aka Babbman)



They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety...
Benjamin Franklin, Historical Review of Pennsylvania, 1759


User avatar
Babbman
Posts: 2508
Joined: Sun, Oct 29 2006, 12:44 PM
Location: Aurora, IL
Contact:

Re: Babbman - Cathrine's Wheel II & III

Postby Babbman » Thu, Jan 18 2007, 11:14 PM

OK, I scrounged up some bridle line and finished off Wheel II, this is the 36 cell wheel... I'm tired of tying knots.... 36 tie ins 1st tier = 18 6' lines. Second tier 9 6' lines...

The pictures suck but it's the best I can do at 10pm with choppy winds in my neighborhood.. excuse my arm...

[albumimg]429[/albumimg][albumimg]430[/albumimg]

next wheel to be bridled up tomorrow night... 48-12-6-3... that's a lot of knots to tie up...

My goal is to get all 3 wheels out on Sunday and lofted by my sled or flowform...

Also working on a sled for Elie!... I let her pick the colors tonight also... pink and blue... she wanted purple in there also but... no... sorry... 2 colors only...

Chris, I need to know how you did that fuzzy tail...


Chris (aka Babbman)



They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety...
Benjamin Franklin, Historical Review of Pennsylvania, 1759


User avatar
Frodos Majik
Posts: 1358
Joined: Sun, Oct 29 2006, 08:33 PM
Location: Calumet City, IL.

Re: Babbman - Cathrine's Wheel II & III

Postby Frodos Majik » Fri, Jan 19 2007, 12:11 AM

C/W looking good Ol' Chap!!! Cannot wait to see all three on the 27th!!
That sure is a LOT of knots!! :shock: :shock:

Only 2 colors for Elie? Whats the matter You NOT scared, R U? :rotfl :cry:
May Ol Ma Nature never hold her
breath on you.
-------
Ken

User avatar
Chris
Posts: 877
Joined: Sun, Oct 29 2006, 06:58 PM
Location: Montgomery, Illinois

Re: Babbman - Cathrine's Wheel II & III

Postby Chris » Fri, Jan 19 2007, 04:51 AM

It's too easy!!! Take a strip of ripstop at least two inches wide, mark center the length of the piece, and just zigzag a piece of line down the length of material. Be sure the line overhangs both ends by a few inches. Cut slits on both sides of the line just shy of the stitching every 1/2 inch or so and take the whole thing and ball it up and smash it real good in your hands; and voila!!! A fuzzy tail. :mrblue:
It's a great satisfaction knowing that for a brief point in time you made a difference.



-unknown

User avatar
Babbman
Posts: 2508
Joined: Sun, Oct 29 2006, 12:44 PM
Location: Aurora, IL
Contact:

Re: Babbman - Cathrine's Wheel II & III

Postby Babbman » Mon, Jan 22 2007, 11:14 AM

FYI, I completed the 48 cell on Saturday... of course, we have had no wind so I haven't been able to test it yet... I probably won't have time to put them all together inside of themselves before Saturday but I'll have them with me anyway... I need to string all 3 of them up in the wind and see how they act.... stupid tests of me holding them in the choppy wind in front of my house is no real test at all..

I'll post a picture if I get the chance to test it before then...

I also have another project in the works that I started yesterday... I'll surprise you all on Saturday... all I can say is that when I'm done, I will have hemmed 260 feet of ripstop.... I should be good at it by the time I'm done :?


Chris (aka Babbman)



They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety...
Benjamin Franklin, Historical Review of Pennsylvania, 1759


User avatar
Chris
Posts: 877
Joined: Sun, Oct 29 2006, 06:58 PM
Location: Montgomery, Illinois

Re: Babbman - Cathrine's Wheel II & III

Postby Chris » Mon, Jan 22 2007, 05:57 PM

:wink: I think I know!!!! :up:
It's a great satisfaction knowing that for a brief point in time you made a difference.



-unknown

User avatar
Babbman
Posts: 2508
Joined: Sun, Oct 29 2006, 12:44 PM
Location: Aurora, IL
Contact:

Re: Babbman - Cathrine's Wheel II & III

Postby Babbman » Mon, Jan 22 2007, 06:04 PM

Chris wrote::wink: I think I know!!!! :up:


No, my friend... even YOU do not know what I am doing now...

I don't think I decided on doing it until after we talked yesterday...

lol

:rotfl

Spike ball is coming later....

I can't believe how many things I've built or bought this month...

It's disgusting...!


Chris (aka Babbman)



They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety...
Benjamin Franklin, Historical Review of Pennsylvania, 1759


User avatar
Babbman
Posts: 2508
Joined: Sun, Oct 29 2006, 12:44 PM
Location: Aurora, IL
Contact:

Re: Babbman - Cathrine's Wheel II & III

Postby Babbman » Mon, Jan 22 2007, 08:42 PM

Finally, enough wind to test all that hard work...

Here she is... turning left as I intended...

[albumimg]452[/albumimg]

Can't see the bridle lines too well but it goes 48-12-6-3-1

Here's all the lines before I bridled it..

[albumimg]451[/albumimg]


Chris (aka Babbman)



They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety...
Benjamin Franklin, Historical Review of Pennsylvania, 1759


User avatar
Chris
Posts: 877
Joined: Sun, Oct 29 2006, 06:58 PM
Location: Montgomery, Illinois

Re: Babbman - Cathrine's Wheel II & III

Postby Chris » Mon, Jan 22 2007, 09:09 PM

Very cool Babbman!! :up: Can't wait to see all three together :shock:
It's a great satisfaction knowing that for a brief point in time you made a difference.



-unknown

User avatar
Frodos Majik
Posts: 1358
Joined: Sun, Oct 29 2006, 08:33 PM
Location: Calumet City, IL.

Re: Babbman - Cathrine's Wheel II & III

Postby Frodos Majik » Tue, Jan 23 2007, 12:41 AM

Nice job, I second with what you have stated about the sewing that has been going on here. We are going to spend have of the morning on saturday, just showing off ALL of the projects that have been done!! :shock: :lol: I also here you about the wind, OL'Ma Nature was VERY Cruel to us this weekend!! :evil: I wanted to try out my 69sled this past week end, but to no avail either. :evil:
May Ol Ma Nature never hold her

breath on you.

-------

Ken

User avatar
Babbman
Posts: 2508
Joined: Sun, Oct 29 2006, 12:44 PM
Location: Aurora, IL
Contact:

Re: Babbman - Cathrine's Wheel II & III

Postby Babbman » Tue, Jan 23 2007, 07:04 AM

thanks guys, I appreciate the kudos...

I took inventory this morning...

here's what I've built since December 23rd

2 - Circoflex's & carrying bags
3 - Catherine's Wheels (24/36/48 cell) & carrying bag
1 - Rok & carrying bag
1 - Pocket Sled & bag
1 - Secret project (can't give everything away now, can I?)
[albumimg]278[/albumimg][albumimg]404[/albumimg][albumimg]391[/albumimg][albumimg]378[/albumimg][albumimg]430[/albumimg][albumimg]452[/albumimg][albumimg]449[/albumimg][albumimg]453[/albumimg]


Here's what I've bought

1 - Gomberg Super Sled
1 - HQ 2M Flowform
1 - 96' tail
2 - 48' tails
2 - 24' tubes
3 - 35' streamers
1 - 5' spinsock
1 - 5' wacky worm (ok, I was given this...lol)
various line/winders/stakes/carabiners. etc...

I sure hope there is wind on Saturday! :clubfly:


Chris (aka Babbman)



They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety...
Benjamin Franklin, Historical Review of Pennsylvania, 1759


User avatar
Mike
Posts: 6675
Joined: Sun, Oct 29 2006, 05:03 PM
Location: Charleston, IL

Re: Babbman - Cathrine's Wheel II & III

Postby Mike » Tue, Jan 23 2007, 11:40 AM

WOW! Amazing!
We will make a hell of an impression at our club fly and at festivals.
I'm such a slacker, I haven't made a thing!

User avatar
Babbman
Posts: 2508
Joined: Sun, Oct 29 2006, 12:44 PM
Location: Aurora, IL
Contact:

Re: Babbman - Cathrine's Wheel II & III

Postby Babbman » Tue, Jan 23 2007, 11:43 AM

Mike wrote:WOW! Amazing!
We will make a hell of an impression at our club fly and at festivals.
I'm such a slacker, I haven't made a thing!


I agree..lol

But I think we all need to do some projects that feature the IKE logo on them.


Chris (aka Babbman)



They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety...
Benjamin Franklin, Historical Review of Pennsylvania, 1759


User avatar
Draftnik
Posts: 505
Joined: Tue, Nov 21 2006, 08:57 AM

Re: Babbman - Cathrine's Wheel II & III

Postby Draftnik » Tue, Jan 23 2007, 01:26 PM

I'm thinking you guys might need some intersession. :mrviolet:

Good to see you back Mike!
TTFN,
Draftnik

User avatar
Babbman
Posts: 2508
Joined: Sun, Oct 29 2006, 12:44 PM
Location: Aurora, IL
Contact:

Re: Babbman - Cathrine's Wheel II & III

Postby Babbman » Tue, Jan 23 2007, 02:27 PM

Draftnik wrote:I'm thinking you guys might need some intersession. :mrviolet:


I was thinking more along the lines of 'A LIFE'

:rotfl


Chris (aka Babbman)



They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety...
Benjamin Franklin, Historical Review of Pennsylvania, 1759


User avatar
Frodos Majik
Posts: 1358
Joined: Sun, Oct 29 2006, 08:33 PM
Location: Calumet City, IL.

Re: Babbman - Cathrine's Wheel II & III

Postby Frodos Majik » Tue, Jan 23 2007, 06:40 PM

Holy :zip: :zip: Babbman!!!!! :shock: Having a problem sleeping lately, and the wallet a LOT lighter? :rotfl

:rotfl The first step in recovery is ADMITTING you have a problem!! :rotfl
May Ol Ma Nature never hold her

breath on you.

-------

Ken

User avatar
Babbman
Posts: 2508
Joined: Sun, Oct 29 2006, 12:44 PM
Location: Aurora, IL
Contact:

Re: Babbman - Cathrine's Wheel II & III

Postby Babbman » Tue, Jan 23 2007, 07:18 PM

Frodos Majik wrote:Holy :zip: :zip: Babbman!!!!! :shock: Having a problem sleeping lately, and the wallet a LOT lighter? :rotfl

:rotfl The first step in recovery is ADMITTING you have a problem!! :rotfl


Hi, my name is Babbman and I am a kite addict


AND PROUD OF IT!


Chris (aka Babbman)



They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety...
Benjamin Franklin, Historical Review of Pennsylvania, 1759


User avatar
Frodos Majik
Posts: 1358
Joined: Sun, Oct 29 2006, 08:33 PM
Location: Calumet City, IL.

Re: Babbman - Cathrine's Wheel II & III

Postby Frodos Majik » Wed, Jan 24 2007, 12:02 AM

:rotfl :ditto :rotfl
May Ol Ma Nature never hold her

breath on you.

-------

Ken


Return to “Completed Creations”

Who is online

Users browsing this forum: No registered users and 0 guests