Жк Индикаторы Часы Реального Времени

&#;&#;&#;&#;&#;&#;&#; &#;&#;&#; &#;&#;&#;&#;&#;&#;&#;&#;&#;&#;&#; &#;&#;&#;&#;&#;&#;&#;&#;&#;&#;&#;&#;&#;, &#;&#;&#;&#;&#;&#;&#;&#;&#;&#;&#;&#; &#;&#;&#;&#;&#;&#;
&#;&#;&#;&#;&#;&#;&#;&#;&#;&#;&#;&#;&#;&#;&#;&#;: &#;&#;&#;&#; &#;&#;&#;&#;&#;&#;&#;&#; / &#;&#;&#;&#;&#;&#;&#;&#;&#; &#; &#;&#;&#;&#;&#;&#;&#;&#;&#;&#;&#;&#;&#;&#;&#;&#;&#; &#;&#;&#;&#;&#;&#;&#;&#;&#;&#;&#;, &#;&#;&#;&#;&#;&#;&#;&#;&#;&#;&#; 99 &#;&#;&#;&#;&#;&#;
&#;&#; &#;&#;&#;&#;&#;&#;&#; &#;&#; 6 &#;&#;&#;&#;&#;&#;&#;&#; &#;&#;&#;&#;&#;&#;&#; 20 mm &#; &#;&#;&#;&#;&#;&#; &#;&#;&#;&#;&#;&#;&#;&#;&#;&#; (WTABL)
&#;&#;&#;&#;&#;&#;&#;&#;&#;&#;&#;&#; &#;&#;&#;&#;&#;&#;&#; &#;&#;&#;&#;&#;&#;&#; &#;&#; 6 &#;&#;&#;&#;&#;&#;&#;&#; &#;&#;&#;&#;&#;&#;&#; 20 mm (WTABR)
&#;&#; &#;&#;&#;&#;&#;&#;&#;&#;&#;&#;&#; &#;&#;&#;&#;&#;&#;&#; x39 mm, x64 &#;&#;&#;&#;&#;&#;&#;&#; &#; &#;&#;&#;&#;&#;&#; &#;&#;&#;&#;&#;&#;&#;&#;&#;&#; (WTABG)
&#;&#; &#;&#;&#;&#;&#;&#;&#;&#;&#;&#;&#; &#;&#;&#;&#;&#;&#;&#; &#; &#;&#;&#;&#;&#;&#; &#;&#;&#;&#;&#;&#;&#;&#;&#;&#;&#;, x75 mm, x &#;&#;&#;&#;&#;&#;&#;&#; (WTAB2G)
&#;&#;&#;&#;&#;&#;&#;&#;&#;&#;&#;&#; &#;&#;&#;&#;&#;&#;&#;&#;&#; (WTABG)
RS &#; RS &#;&#;&#;&#;&#; (Modbus RTU/Laumas ASCII &#;&#;&#;&#;&#;&#;&#;&#;)
3 &#;&#;&#;&#;&#;&#;&#;&#;&#;&#; &#;&#;&#;&#;&#;, 5 &#;&#;&#;&#;&#;&#;&#;&#; &#;&#;&#;&#;&#;&#;&#;
OIML R &#;&#;&#;&#;&#;&#;&#;&#;&#;&#;&#;&#;, &#;&#;&#;&#;&#; III, &#;&#;&#;&#;&#;&#;&#; μV/VSI
OIML R61 &#;&#;&#;&#;&#;&#;&#;&#;&#;&#;- WELMEC &#;&#;&#;&#;&#;&#;&#;&#;&#;&#;&#; (M.I.D.)
&#;&#;&#;&#;&#;&#;&#;&#;&#;&#;&#;&#; &#;&#;&#;&#;&#;&#;&#; &#;&#;&#;&#;: Profibus DP, DeviceNet, CANopen, Profinet IO, Modbus/TCP, Ethernet/IP.
Ethernet TCP/IP &#;&#;&#;&#; &#;&#;&#; &#;&#;&#;&#;&#;&#;&#;&#;&#;&#;&#;&#;&#;&#; &#;&#;&#;&#;&#;&#;&#;&#;&#;&#; &#;&#;&#;&#;&#; internet &#; &#;&#;, &#;&#;&#;&#;&#;&#;&#;&#;&#;, &#;&#;&#;&#;&#;&#;&#;&#; &#; &#;&#;.
&#;&#;&#; &#;&#;&#;&#;&#;&#;&#;&#;&#; 24bit ( &#;&#;&#;&#;&#;) kHz
&#;&#;&#;&#;&#;&#;&#;&#; &#;&#;&#;&#;&#;&#;&#;&#;&#;&#;&#;

&#;&#;&#;&#;&#;:

&#;&#;&#;&#;&#;&#;&#;&#;&#;&#; &#;&#;&#;&#;&#;&#;&#;&#;&#;&#;&#;&#;
&#;&#;&#;&#;&#;&#;&#;&#;&#;&#; &#;&#;&#;&#;&#;&#; &#;&#; USB &#;&#;&#;&#;
bit &#;&#;&#;&#;&#;&#;&#;&#;&#;&#; &#;&#;&#;&#;&#;: 0/ mA; /10 V; ±5/10 V

&#;&#;&#;&#;&#;&#; &#;&#;&#;&#;&#;&#;&#;&#;&#;&#;&#;&#;&#;&#;&#; &#; &#;&#;

/**

* The MySensors Arduino library handles the wireless radio link and protocol

* between your home built sensors/actuators and HA controller of choice.

* The sensors forms a self healing radio network with optional repeaters. Each

* repeater and gateway builds a routing tables in EEPROM which keeps track of the

* network topology allowing messages to be routed to nodes.

*

* Created by Henrik Ekblad <[email protected]>

* Copyright (C) Sensnology AB

* Full contributor list: eunic-brussels.eu

*

* Documentation: eunic-brussels.eu

* Support Forum: eunic-brussels.eu

*

* This program is free software; you can redistribute it and/or

* modify it under the terms of the GNU General Public License

* version 2 as published by the Free Software Foundation.

*

*******************************

*

* REVISION HISTORY

* Version - Henrik Ekblad

*

* DESCRIPTION

* Example sketch showing how to request time from controller which is stored in RTC module

* The time and temperature (DS/DS) is shown on an attached Crystal LCD display

*

*

* Wiring (radio wiring on eunic-brussels.eu)

*

* Arduino   RTC-Module     I2C Display

*

* GND       GND            GND

* +5V       VCC            VCC

* A4        SDA            SDA

* A5        SCL            SCL

*

* eunic-brussels.eu

*

*/

// Enable debug prints to serial monitor

#define MY_DEBUG

// Enable and select radio type attached

#define MY_RADIO_RF24

//#define MY_RADIO_RFM69

#include <SPI.h>

#include <MySensors.h>  

#include <TimeLib.h>

#include <DSRTC.h>  // A  DS/DS library

#include <Wire.h>

#include <LiquidCrystal_I2C.h>

booltimeReceived=false;

unsignedlonglastUpdate=0,lastRequest=0;

// Initialize display. Google the correct settings for your display.

// The follwoing setting should work for the recommended display in the MySensors "shop".

LiquidCrystal_I2Clcd(0x27,2,1,0,4,5,6,7,3,POSITIVE);

voidsetup()  

{  

  // the function to get the time from the RTC

  setSyncProvider(eunic-brussels.eu);  

  // Request latest time from controller at startup

  requestTime();  

  // initialize the lcd for 16 chars 2 lines and turn on backlight

  eunic-brussels.eu(16,2);

}

voidpresentation()  {

  // Send the sketch version information to the gateway and Controller

  sendSketchInfo("RTC Clock","");

}

// This is called when a new time value was received

voidreceiveTime(unsignedlongcontrollerTime){

  // Ok, set incoming time

  eunic-brussels.eu("Time value received: ");

  eunic-brussels.eun(controllerTime);

  eunic-brussels.eu(controllerTime);// this sets the RTC to the time from controller - which we do want periodically

  timeReceived=true;

}

voidloop()    

{    

  unsignedlongnow=millis();

  // If no time has been received yet, request it every 10 second from controller

  // When time has been received, request update every hour

  if((!timeReceived&&(now-lastRequest)>(10UL*UL))

33973 33974 33975 33976 33977

аналитика форекс gbp кaртa мирa форекс вспомогательные индикаторы форекс как платят налоги трейдеры валютного рынка форекс лучшие индикаторы для входа индикаторы измерения температуры щитовые дмитрий котенко форекс клипaрт для форекс имхо на форексе дц форекс брокер отзывы безрисковая комбинация форекс индикаторы рынка ферросплавов